{"id":975,"date":"2026-08-25T10:18:23","date_gmt":"2026-08-25T01:18:23","guid":{"rendered":"https:\/\/iupizeta.mgc.co.jp\/?post_type=column&p=975"},"modified":"2026-08-25T10:18:46","modified_gmt":"2026-08-25T01:18:46","slug":"abbe-number","status":"publish","type":"column","link":"https:\/\/iupizeta.mgc.co.jp\/en\/column\/abbe-number\/","title":{"rendered":"What is Abbe number? From the basics of chromatic aberration to choosing optical materials"},"content":{"rendered":"\n

The Abbe number is a metric that expresses how much a lens material disperses light by wavelength. The larger the value, the smaller the chromatic aberration \u2014 but a low value does not mean the material is inferior. This article covers the meaning of the definition, measured values by material, and how the number is used in lens design.<\/p>\n\n\n\n

\ud83d\udccc Three-point summary<\/p>\n\n\n\n

Abbe number \u03bdd = (nd \u2212 1)\/(nF \u2212 nC). The larger the value, the smaller the wavelength dependence of refractive index<\/p>\n\n\n\n

Refractive index and Abbe number trade off against each other. The more a material’s refractive index is raised to enable thinner lenses, the lower its Abbe number becomes<\/p>\n\n\n\n

Achromatic lenses require a low-Abbe-number material \u2014 a low value is a function, not a defect<\/p>\n\n\n\n

What Is Abbe Number?<\/h2>\n\n\n\n

What the Abbe number means, in one line<\/h3>\n\n\n\n

The Abbe number is a metric expressing how little a lens material disperses light across wavelengths; its symbol is \u03bdd.<\/p>\n\n\n\n

White light consists of multiple wavelength components, and as it passes through a lens it separates according to the refractive-index differences at each wavelength. This degree of separation is called dispersion, and the larger the Abbe number, the smaller the dispersion. The name comes from the German physicist Ernst Abbe.<\/p>\n\n\n\n

Reading the definition \u03bdd = (nd \u2212 1)\/(nF \u2212 nC)<\/h3>\n\n\n\n

The definition is as follows:<\/p>\n\n\n\n

\u03bdd = (nd \u2212 1) \/ (nF \u2212 nC)<\/p>\n\n\n\n

Numerator (nd \u2212 1) : expresses the magnitude of refractive power. The larger nd is, the larger the refraction angle becomes<\/p>\n\n\n\n

Denominator (nF \u2212 nC) : expresses the refractive-index difference between blue and red light \u2014 that is, the magnitude of wavelength dependence<\/p>\n\n\n\n

\u03bdd can therefore be interpreted as refractive power divided by wavelength dependence. Substituting the values for the optical glass N-BK7 (nd 1.51680, nF 1.52238, nC 1.51432) into the equation gives 64.1, consistent with the published value of \u03bdd 64.17 (SCHOTT).<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

The three reference wavelengths<\/h3>\n\n\n\n

d, F, and C are symbols for specific spectral lines known as the Fraunhofer lines.<\/p>\n\n\n\n

Symbol<\/th>Wavelength<\/th>Source element<\/th>Visible color<\/th><\/tr><\/thead>
d-line<\/td>587.56 nm<\/td>Helium (He)<\/td>Yellow<\/td><\/tr>
F-line<\/td>486.13 nm<\/td>Hydrogen (H)<\/td>Blue<\/td><\/tr>
C-line<\/td>656.27 nm<\/td>Hydrogen (H)<\/td>Red<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

These values are specified in JIS B 7090:1999 (ISO 7944:1998) (Shimadzu Corporation), and in practice are sometimes rounded to 587.6 \/ 486.1 \/ 656.3 nm.<\/p>\n\n\n\n

Dispersion and Chromatic Aberration: Why the Abbe Number Matters<\/h2>\n\n\n\n

Dispersion: how refractive index changes with color<\/h3>\n\n\n\n

Refractive index expresses the degree to which light bends, and it varies with wavelength. In most transparent materials, the refractive index is higher toward shorter wavelengths (blue light); this wavelength dependence is dispersion.<\/p>\n\n\n\n

Axial and lateral chromatic aberration<\/h3>\n\n\n\n

When dispersion is present, the image position and magnification shift by color, appearing as chromatic aberration. Chromatic aberration is broadly divided into two types: axial chromatic aberration and lateral chromatic aberration.<\/p>\n\n\n\n

Axial chromatic aberration (longitudinal chromatic aberration)A phenomenon in which the focal position shifts with wavelength. It occurs even at the center of the frame and degrades resolution across the entire image. It can be reduced by stopping down the aperture.<\/p>\n\n\n\n

Lateral chromatic aberration (transverse chromatic aberration)A phenomenon in which image magnification changes with wavelength. It produces colored fringing at the periphery of the frame. Because it also occurs in chief rays passing through the center of the lens, it cannot be reduced by stopping down the aperture.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

For objective lenses, correcting axial chromatic aberration is considered essential, and lenses are classified as achromats or apochromats depending on the degree of correction (Nikon Solutions; Astronomical Society of Japan, \u2018Dictionary of Astronomy\u2019).<\/p>\n\n\n\n

Abbe Numbers of Major Optical Materials<\/h2>\n\n\n\n

Comparing optical glass and optical resin<\/h3>\n\n\n\n

The table below shows refractive index and Abbe number by material.<\/p>\n\n\n\n

Material<\/th>Type<\/th>Refractive index nd<\/th>Abbe number \u03bdd<\/th><\/tr><\/thead>
N-BK7<\/td>Optical glass<\/td>1.51680<\/td>64.17<\/td><\/tr>
PMMA (acrylic)<\/td>Optical resin<\/td>approx. 1.49<\/td>approx. 57 (*)<\/td><\/tr>
COP<\/td>Optical resin<\/td>1.535<\/td>56<\/td><\/tr>
Standard polycarbonate<\/td>Optical resin<\/td>1.586<\/td>30<\/td><\/tr>
Iupizeta EP (specialty PC)<\/td>Optical resin<\/td>1.616\u20131.671<\/td>19.2\u201325.8<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Source: SCHOTT, Zeon Corporation, MGC Trading<\/a>, Iupizeta EP<\/a>* Figures for PMMA and standard polycarbonate are industry-representative values. Depending on the reference, PMMA ranges from \u03bdd 57\u201358, and standard PC from nd in the low 1.58s to \u03bdd around 30\u201331. When designing, check the manufacturer’s latest technical data sheet.<\/p>\n\n\n\n

Reading catalog values<\/h3>\n\n\n\n

Whether a figure in a property table is a measured value or a specification value must be read with care. Iupizeta EP carries the following note:<\/p>\n\n\n\n

These are measured values, not specification values.<\/p>\n\n\n\n

Measured values are actual readings taken under representative conditions; they do not imply guaranteed upper or lower limits. When tightening tolerances, it is necessary to confirm the measurement conditions as well \u2014 wavelength, temperature, and sample thickness.<\/p>\n\n\n\n

The Trade-off Between Refractive Index and Abbe Number<\/h2>\n\n\n\n

The higher the refractive index, the lower the Abbe number<\/h3>\n\n\n\n

In optical materials, refractive index and Abbe number trade off against each other in an unavoidable way: raising the refractive index lowers the Abbe number.<\/p>\n\n\n\n

Iupizeta EP follows the same trend: as its refractive index rises from 1.616 to 1.671, its Abbe number decreases monotonically from 25.8 to 19.2. The same holds for optical glass \u2014 against N-BK7’s Abbe number of 64.17, flint glass used for achromats stays around 30.<\/p>\n\n\n\n

The cause lies in the material’s electronic structure: molecular structures that raise the refractive index simultaneously increase wavelength dependence.<\/p>\n\n\n\n

A high-refractive-index material contributes to thinner lenses, but increases chromatic aberration. This trade-off is the starting point for optical design.<\/p>\n\n\n\n

A familiar example: eyeglass lenses<\/h3>\n\n\n\n

The same trade-off applies to eyeglass lenses. High-index lenses with a refractive index around 1.74 can see their Abbe number drop to around 31, while lenses with a refractive index around 1.50 show Abbe numbers in the 50s. The more the refractive index is raised to thin the lens, the more readily chromatic aberration becomes visible. For figures on individual grades, refer to the manufacturer’s latest catalog.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Where Low-Abbe-Number Materials Are Used: Achromatic Lens Design<\/h2>\n\n\n\n

For a single lens, \u201cbigger is better\u201d<\/h3>\n\n\n\n

For a single-lens configuration, the logic is simple: the larger the Abbe number of the chosen material, the smaller the chromatic aberration. The textbook statement that \u201ca larger Abbe number is better\u201d rests on this premise.<\/p>\n\n\n\n

In practice, however, optical products are rarely built from a single lens. Smartphone cameras stack multiple lens elements, and as the element count increases, this premise reverses.<\/p>\n\n\n\n

How achromatic lenses work<\/h3>\n\n\n\n

The achromat (achromatic lens) is the classical technique for correcting chromatic aberration.<\/p>\n\n\n\n

A convex element made of a high-Abbe-number material (low-dispersion crown glass, \u03bdd approx. 65)<\/p>\n\n\n\n

A concave element made of a low-Abbe-number material (high-dispersion flint glass, \u03bdd approx. 30)<\/p>\n\n\n\n

Cementing these two elements together cancels their chromatic aberrations, bringing two selected wavelengths to a common focal point.<\/p>\n\n\n\n

The achromatic condition requires that the sum of each element’s power (refractive power) divided by its Abbe number equal zero. Because the convex and concave elements carry opposite signs, this condition can be satisfied as long as their Abbe numbers differ. If the two Abbe numbers were equal, the sum of the powers would also be zero, and the assembly would not function as a lens. Pairing materials with different Abbe numbers is therefore the essential condition for achromatization.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

A low-Abbe-number material is not an inferior material \u2014 it is a functional material used on the concave-element side to correct chromatic aberration. High-dispersion, high-refractive-index resins such as Iupizeta EP (\u03bdd 19.2\u201325.8) fill this role.<\/p>\n\n\n\n

Don’t choose a material by Abbe number alone<\/h3>\n\n\n\n

In practical material selection, indicators beyond the Abbe number are evaluated at the same time.<\/p>\n\n\n\n

Birefringence : the degree to which light splits into two refracted directions due to molecular orientation during molding<\/p>\n\n\n\n

Glass transition temperature (Tg) : the temperature at which softening begins<\/p>\n\n\n\n

Total luminous transmittance and haze : transmittance and cloudiness<\/p>\n\n\n\n

Water absorption : dimensional and refractive-index changes due to moisture uptake<\/p>\n\n\n\n

Molding flowability : fill performance for thin-walled, small-diameter lenses<\/p>\n\n\n\n

Standard polycarbonate has a high refractive index, but it also tends to show large in-plane birefringence. In a comparison table published by MGC Trading, standard PC measures 230 against 5\u20136 for Iupizeta EP (in-plane birefringence, 1\/32 thickness).<\/p>\n\n\n\n

The related indicators are explained in detail in the articles below.<\/p>\n\n\n\n

Birefringence<\/a> \u2014 Glass transition temperature (Tg)<\/a> \u2014 Total luminous transmittance and haze<\/a> \u2014 Water absorption<\/a><\/p>\n\n\n\n

Iupizeta\u00ae EP as an Option<\/h2>\n\n\n\n

A specialty polycarbonate that combines high refractive index with low birefringence<\/h3>\n\n\n\n

Iupizeta EP is a specialty optical polycarbonate resin developed by Mitsubishi Gas Chemical, supplied as pellets for injection molding. The official website lists six features: high refractive index (nd 1.616\u20131.671), low birefringence, high heat resistance (Tg 140\u2013145\u00b0C), flowability, sustainability, and light weight. Its intended applications are smartphone cameras, web cameras, AR\/VR, and automotive optical systems.<\/p>\n\n\n\n

A material whose dispersion can also be engineered<\/h3>\n\n\n\n

Whereas glass is selected from an existing list of glass materials, resin allows the composition itself to be treated as a design variable. With Iupizeta EP, combinations of more than 200 monomers make it possible to customize refractive index, birefringence, heat resistance, and wavelength dispersion.<\/p>\n\n\n\n

Being able to start composition studies from a target Abbe number value is what distinguishes this approach from designs premised on selecting from an existing glass-material list.<\/p>\n\n\n\n

Summary<\/h2>\n\n\n\n

Abbe number \u03bdd = (nd \u2212 1)\/(nF \u2212 nC) = refractive power \u00f7 wavelength dependence. The larger the value, the less chromatic aberration occurs<\/p>\n\n\n\n

Raising the refractive index lowers the Abbe number. Thinning the lens and suppressing chromatic aberration are in a trade-off relationship<\/p>\n\n\n\n

For a single lens, a larger value is advantageous, but in multi-element configurations, low-Abbe-number materials become essential for achromatization<\/p>\n\n\n\n

Material selection also evaluates birefringence, Tg, transmittance, water absorption, and molding flowability at the same time<\/p>\n\n\n\n

A material with a low Abbe number is a functional material that designers select deliberately to cancel chromatic aberration. Iupizeta EP offers the high-dispersion range of \u03bdd 19.2\u201325.8 as an injection-moldable resin. For questions about grade-specific properties, measurement conditions, or sample provision, please reach out via the inquiry form on the official website.<\/p>\n\n\n\n

Iupizeta EP official website<\/a><\/p>\n\n\n\n

\n\n\n\n

Some images and text in this article were created with the help of generative AI.<\/p>\n","protected":false},"featured_media":912,"template":"","meta":{"_acf_changed":false,"_locale":"en_US","_original_post":"https:\/\/iupizeta.mgc.co.jp\/?post_type=column&p=897"},"column_tax":[52],"class_list":["post-975","column","type-column","status-publish","has-post-thumbnail","hentry","column_tax-basics","en-US"],"acf":[],"_links":{"self":[{"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/column\/975","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/column"}],"about":[{"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/types\/column"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/media\/912"}],"wp:attachment":[{"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/media?parent=975"}],"wp:term":[{"taxonomy":"column_tax","embeddable":true,"href":"https:\/\/iupizeta.mgc.co.jp\/wp-json\/wp\/v2\/column_tax?post=975"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}